Technical parameters 180T-1000T
|
| ZG180 | ZG350 | ZG450 | ZG550 | ZG700 | ZG850 | ZG1000 |
| Clamping force | kN | 1800 | 3500 | 4500 | 5500 | 7000 | 8500 | 10000 |
| Clamping stroke | mm | 380 | 460 | 550 | 580 | 670 | 760 | 880 |
| Mold thickness (min-max) | mm | 250-600 | 250-700 | 00-750 | 350-850 | 350-900 | 400-950 | 450-1150 |
| Tie Bar Spacing (Horizontal x Vertical) | mm | 460×460 | 570×570 | 650×650 | 755×755 | 860×860 | 930×930 | 1030×1030 |
| Platen Size (Horizontal x Vertical) | mm | 710×710 | 910×910 | 1050×1050 | 1200×1200 | 1380×1380 | 1470×1470 | 1680×1680 |
| Ejection force | kN | 125 | 180 | 200 | 250 | 360 | 360 | 500 |
| Ejection stroke | mm | 85 | 110 | 130 | 150 | 160 | 180
| 200 |
| Injection Force (Intensified) | kN | 300 | 380 | 476 | 580 | 605 | 695 | 885
|
| Injection stroke | mm | 350
| 410 | 510
| 600 | 650
| 760 | 800 |
| Plunger Tip Diameter | mm | 40/50/60 | 50/60/70 | 60/70/80 | 70/80/90 | 70/80/90 | 80/90/100 | 90-120 |
| Injection volume (aluminum) | kg | 0.8/1.3/1.9 | 1.5/2.2/3.0 | 2.7/3.7/4.8 | 4.3/5.7/7.2 | 4.7/6.1/7.7 | 7.2/9.1/11.2 | 9.5-17 |
| Injection position | mm | -140 | -125/-140 | -175 | -175 | -250 | 0,-250 | 0,-300 |
| Plunger Tip Protrusion | mm | 147 | 152 | 210
| 270 | 280
| 300 | 300 |
| Shot Sleeve Flange Diameter | mm | 101.6 | 101.6 | 101.6 | 165 | 165 | 200
| 240 |
| Shot Sleeve Flange Protrusion From Fixed Platen | mm | 12 | 12 | 12 | 15 | 15 | 20 | 20 |
| Casting Pressure (Intensified) | MPa | 239/153/106 | 194/135/99 | 168/124/95 | 151/115/92 | 157/120/95 | 138/109/89 | 139-78 |
| Casting area | cm2 | 75/117/170 | 180/259/353 | 268/363/474 | 364/478/601 | 446/583/737 | 616/780/955 | 719-1278 |
| Maximum casting area (40MPa) | cm2 | 450 | 875 | 1125
| 1375 | 1750
| 2125
| 2500 |
| Motor power/servo motor power | kW | 18.8 | 31.8 | 43
| 55 | 65 | 65 | 65 |
| System working pressure | MPa | 16 | 16 | 16 | 16 | 16 | 16 | 19 |
| Lifting reference weight | T | 7
| 11.8 | 16.8
| 22
| 34 | 38
| 62 |
| Hydraulic Oil Filling Volume | L | 420
| 680 | 760
| 960 | 1150
| 1250 | 1850 |
| Overall dimension (L x W x H) | mm | 5900×1600×2750 | 6200×1800×2550 | 7300×2000×2900 | 8350×2250×2950 | 8800×2350×2950 | 9500×2500×3200 | 9850×3800×3100 |
The Company reserves the right to modify the technical parameters without prior notice.
Technical parameters 1300T-4500T
|
| ZG1300 | ZG1650 | ZG2000 | ZG2500 | ZG3000 | ZG3500 | ZG4000 | ZG4500 |
| Clamping force | kN | 13000 | 16500 | 20000 | 25000 | 30000 | 35000 | 40000 | 45000 |
| Clamping stroke | mm | 1000 | 1200 | 1400 | 1500 | 1550 | 1600 | 1800 | 1900 |
| Mold thickness (min-max) | mm | 450-1200 | 500-1400 | 600-1600 | 750-1800 | 800-2000 | 800-2000 | 900-2100 | 900-2200 |
| Tie Bar Spacing (Horizontal x Vertical) | mm | 1100×1100 | 1250×1250 | 1450×1350 | 1600×1500 | 1650×1650 | 1750×1650 | 1850×1850 | 1965×1865 |
| Platen Size (Horizontal x Vertical) | mm | 1760×1760 | 2000×2000 | 2350×2250 | 2500×2500 | 2650×2650 | 2800×2700 | 2960×2900 | 3100×3000 |
| Ejection force | kN | 560
| 570
| 650
| 750 | 900
| 900 | 1000
| 1000 |
| Ejection stroke | mm | 210
| 250 | 300 | 300
| 300 | 300 | 350 | 400 |
| Injection Force (Intensified) | kN | 1170 | 1295 | 1700 | 1700 | 2110 | 2410 | 2500 | 2500 |
| Injection stroke | mm | 910 | 970 | 1050 | 1100 | 1250 | 1400 | 1600 | 1600 |
| Plunger Tip Diameter | mm | 100-140 | 110-150 | 130-170 | 140-180 | 150-190 | 160-200 | 160-200 | 180-220 |
| Injection volume (aluminum) | kg | 13.4-26.3 | 17.3-32.1 | 26.1-44.7 | 31.7-52.5 | 41.4-66.4 | 52.8-82.5 | 60.3-94.2 | 76.3-114 |
| Injection position | mm | -160,-320 | -175,-350 | -175,-350 | -200,-400 | -250,-450 | -300,-600 | -300,-600 | -300,-600 |
| Plunger Tip Protrusion | mm | 355 | 400 | 440 | 450 | 550
| 600 | 745
| 700 |
| Shot Sleeve Flange Diameter | mm | 240
| 260 | 260 | 280
| 280 | 320 | 320 | 340
|
| Shot Sleeve Flange Protrusion From Fixed Platen | mm | 25
| 25 | 30 | 30 | 30 | 35
| 35 | 35 |
| Casting Pressure (Intensified) | MPa | 143-73 | 136-73 | 128-75 | 110-67 | 119-74
| 120-77 | 124-80 | 98-66 |
| Casting area | cm2 | 910-1780 | 1210-2260 | 1562-2670 | 2270-3730 | 2510-4030 | 2915-4545 | 3217-5027 | 4580-6842 |
| Maximum casting area (40MPa) | cm2 | 3250 | 4125 | 5000 | 6250 | 7500 | 8750 | 10000 | 11250 |
| Motor power/servo motor power | kW | 55x2 | 55x2 | 55x3 | 55x3 | 55x3 | 55x4 | 55x4 | 55x4 |
| System working pressure | MPa | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 |
| Lifting reference weight | T | 82 | 110 | 135 | 160 | 190 | 220
| 270 | 300
|
| Hydraulic Oil Filling Volume | L | 2120
| 2120 | 3350 | 3350 | 3450 | 3750 | 3750 | 3750 |
| Overall dimension (L x W x H) | mm | 12150×4450×4250 | 13100×4600×4300 | 14400×4750×4450 | 15000×5450×4500 | 15800×5450×4500 | 16600×5900×4600 | 18250×5900×4800 | 19000×6000×5100 |
The Company reserves the right to modify the technical parameters without prior notice.Note: if an independent core-pulling pumping station is selected,the injection volume of hydraulic oil will be increased by 450L.
287
